
“I grew up surrounded by anvils, hammers and fire.”
– Andrés Maldonado
Andrés at a glance
Makes: Hand-forged Damascus kitchen knives in 1095 and 15N20 steel, with wood, resin or horn handles
Based in: Cabra, Spain
Making since: 2018
Prices: €400–€2,500
Commissions: Yes
Ships: Worldwide
Following: 50K on Instagram, 40K on TikTok
The road to knives
Andrés was practically born in a forge. As a small boy he went along with his father to the workshop in Cabra – initially just to play, then, little by little, to help. His father was a blacksmith and a master of the forge, making traditional ironwork: gates, chairs, structures. After school Andrés worked with him on artistic forging until his father retired.

The most important thing he learned there was that metal isn’t worked with strength alone, but with patience, observation and sensitivity. Most of what he knows about knifemaking he taught himself, but that base was fundamental.
He wanted to make swords – he had loved medieval fantasy films since childhood, especially Conan the Barbarian and The Lord of the Rings. He soon saw that swords had little commercial future, so he tried straight razors, with help from a barber in town. He couldn’t make one that was truly functional and safe. After several failed attempts, a friend suggested he try knives.
He started with outdoor knives, then decided to make kitchen knives – and found them far more complicated than he had imagined. A sharp edge wasn’t enough: he had to understand geometry, balance, ergonomics and how a tool should behave in a professional kitchen. He doesn’t remember the exact model he made, but it was the start of a self-taught apprenticeship that became his profession. He started professionally in 2018, and today he works in his father’s old workshop, transformed for his own craft.
The work
Andrés makes his Damascus from two steels: 1095, a high-carbon steel, and 15N20, which contains nickel and gives Damascus patterns their clear contrast. He prepares and forge-welds a stack of 20 layers, then manipulates, stretches, cuts and re-welds it to build different patterns. Time depends on the design, the complexity of the pattern and the knife itself – it can’t be measured by hours at the hammer alone: there is preparation, machining, heat treatment, grinding, finishing and the handle.

What he enjoys most is that he uses no templates for the patterns: he designs and develops them directly on the steel, so each one has its own personality. “I don’t consider Damascus simply a decorative material,” he says. “For me it is a form of artistic expression, but it must always keep the mechanical properties and performance a kitchen tool needs.”

He doesn’t limit himself to traditional Damascus designs. One pattern he developed is the Lion’s Tooth, which shows how far creativity can go working directly on the steel. One of his personal challenges is a pattern inspired by Van Gogh’s The Starry Night. For handles he uses natural woods such as olive and exotic woods including desert ironwood from the Sonoran Desert, as well as resins and different kinds of horn. What drives him is “that a piece can make you feel emotions.”

Showcase
Damascus kitchen knives forge-welded from 1095 and 15N20 steel, with patterns designed directly on the steel and handles of olive wood, desert ironwood, resin or horn.




Where the work lives
Most of Andrés’s clients are home cooks who want a good knife, and professional chefs. Most are in Spain, but he is gradually selling more internationally – to Europe, the United States and parts of Asia; today that is about 5–7% of his sales, and he is working to grow it. Much of his work is made to order and adapted to the client: budget, shape, materials.
Since 2018 he has made around 2,000 knives. Production is limited, because each piece takes a great deal of handwork. “I’m not looking to produce large quantities, but to keep a level of quality and personalization that would be hard to reach with industrial production.”
tinyfound: subscribe
Subscribe for more like this – full stories and digest roundups land in your inbox about once a week.
How people found Andrés
His earliest clients were people close to him. Then a TV cook bought one of his early knives and showed it on his program – and many more people began to know his work.
Word of mouth is what works best: his own clients advertise for him and help him reach more people, and it still matters most among professional chefs. Social media multiplied his international reach. “People can see how a block of steel becomes a finished blade, how Damascus patterns develop, and all the work behind each piece.” Many clients discover Maldonado Knife through his videos – but above all, social media builds trust: someone buying a handmade knife at this price wants to know who makes it and how.

Competitions brought recognition. In 2019 he won the top prize for the best art knife at the knifemaking competition in Albacete, Spain’s cutlery capital, and in 2021 a prize for the most original piece. He has shown at international knife fairs, including Blade Show in the United States, where in 2026 he won Best Chef Knife. “My goal isn’t to compete for a title, but to keep improving technically and develop my own style, recognizable internationally.”

What didn't work
The beginnings were the hardest part. He had no specific training in knifemaking and no professional environment to learn from; he had to research, experiment and get it wrong many times before his knives met his own expectations. The straight razors were one of those early failures. Breaking into professional kitchens was hard too: around him there was no knife industry and no direct contacts with chefs. He knocked on many doors, sent knives out for feedback and accepted criticism to improve.

The turning point
Andrés was watching Cómetelo, the Canal Sur cooking show, with his mother, and decided to write to its cook and presenter, Enrique Sánchez, on Instagram. He offered to make him a personalized knife and in the end sent it as a gift. Enrique showed it on television, and it made quite an impact: suddenly Andrés was getting much more attention and was in touch with cooks from almost all of Andalusia.
“It was one of the first times I saw that my work could go much further than I imagined.”

Quick answers
Who is Andrés Maldonado, and how did he come to knives?
Andrés Maldonado is a bladesmith in Cabra, in the province of Córdoba, Spain, who forges Damascus kitchen knives under the name Maldonado Knife. He grew up in his father’s forge, wanted to make swords, then failed at straight razors; a friend asked why not knives – and kitchen knives, far harder than he expected, became his profession in 2018.
How does Andrés make his work?
Andrés forge-welds his own Damascus from two steels: high-carbon 1095 and nickel-bearing 15N20, which gives the pattern its contrast. He starts with a stack of 20 layers, then stretches, cuts and re-welds it. He uses no templates – every pattern is designed directly on the steel. Handles are olive wood, desert ironwood, resins or horn.
Does Andrés take custom orders or commissions?
Yes – much of Andrés’s work is made to order and adapted to each client: the budget, the shape, the materials. He sells across Spain and internationally, to Europe, the United States and parts of Asia, and his clients are home cooks and professional chefs. Orders start through his website.
How much does Andrés's work cost, and where can you see or buy it?
Andrés’s knives usually cost €400 to €2,500, and special pieces can go higher. You can buy one or order a custom knife at maldonadoknife.com, and follow new knives and the forging behind them on Instagram, @maldonado_knife. He shows his work at international knife fairs, including Blade Show in the United States.
Have a question for Andrés about his knives or a custom order, or a few words about his story and work? Leave them in the comments at the end of this story.
Where to find Andrés Maldonado
Knives in stock and custom orders, shipped internationally.
Instagram: @maldonado_knife
New knives and the forging behind them.